成人无码高潮av在线观看_欧洲极品少妇_夂久亚州精华国产精华华液_在线观看亚洲AV每日更新无码_亚洲国产精品无码久久一线_亚洲精品区午夜亚洲精品区

Self-aligning Two Roller 

In addition to the ball on disc arrangement, the TE 54 is also supplied with a self-aligning carrier to allow a 25 mm diameter by 8 mm wide roller to be mounted in place of the ball specimen, thus resulting in an 8 mm wide line contact. Thinner rollers can be manufactured in order to produce narrower line contacts.

Ball Specimen Diameter: 25 mm
Upper Disc Specimen Diameter: 25 mm
Upper Disc Specimen Width: 8 mm
Lower Disc Specimen Diameter: 50 mm
Maximum Ball Speed: 4,000 rpm
Maximum Ring Speed: 2,000 rpm
Maximum Surface Speed: 5.24 m/s
Maximum Load: 500 N
Maximum Hertz Pressure (steel): 2.0 GPa
Oil Bath Temperature: ambient to 150°C
Heater Power: 250 W
Temperature Sensor: k-type thermocouple
Loading System: Servo controlled pneumatic bellows with force transducer feedback
AC Vector Drive: Two 690PB 0.75 kW closed loop AC flux vector drives with common DC link
Motors: Continuous Power: 0.25 kW @ 50 Hz @ 2,750 rpm (two pole)
Intermittent Power: 0.50 kW @ 50 Hz for 30 seconds
Torque:Speed: Continuous: 0.87/0.87/0.60 Nm @ 0/2,750/4,000 rpm
Intermittent: 1.74/1.74/1.19 Nm @ 0/2,750/4,000 rpm
Feedback: 2,048 ppr encoder
Drive Ratios:
Motor:Ball: 1:1
Motor:Ring: 2:1
Interface: SUPERSLIM Serial Link Interface Module
Software: COMPEND 2000 Windows XP compatible sequence control and data acquisition software

The TE 54 Mini Traction Machine brings together proven design elements from the long established TE 55 Two Roller Lubricity Test Machine and a scaled-down version of the common DC link AC vector drive system used on the TE 74 Two Roller Machines. The servo pneumatic loading system is taken straight from the TE 67 Pin on Disc/Reciprocating Pin on Plate Machine.